Breaking News

Remi M1 Firmware Flash File [Stock ROM]

June 17, 2019

Remi M1 Firmware Flash File [Stock ROM]

Some cases we have bricked our Remi M1. after that, we can bring back the phone with the Stock Firmware anytime. Also if you think your Remi M1 lag or has a problem. Then flash the Stock ROM through the list below and save from situation. Stock Firmware does not void a warranty on the Remi M1.



The Benefit Of Remi M1 Firmware:

  • Flash Stock To Unbrick your Remi M1
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Remi M1
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Remi M1
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Remi M1 Firmware Details:


  • Gapps File: Included
  • Device Supported: Remi M1
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek –MT6572
  • Os: Android
Download
Remi_M1_MT6572_13042018.zip

Pre-Requirements To Flash Remi M1 Firmware:

Take a Backup:

  • 1- Backup your Call Log – Contacts – Sms – Etc With G Backup
  • 2- Backup your current Firmware With MTK Droid Tool
  • 3- Backup your backup IMEI NVRAM

Remi M1 Flashing Tool:

We will use Sp Flash Tool to flash Remi M1 as we use for Tecno W3 Clone. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Remi M1.
SP Flash Tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

Remi M1 Driver:

  • Remi M1 Vcom Drivers: Get MTK Android USB Drivers. and set up on your pc.

How to install Remi M1 Firmware:

  1. Extract And Run SP flash tool.
  2. Install MTK  android USB drivers.
  3. Then download Remi M1 Firmware.
  4. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket.
  5. Now open SP flash tool.exe.
  6. When SP flash tool open, go to download button in SP flash tool.
  7. In the download tab, click on the scatter load button.
  8. After locating the scatter tab, click on the download button.
  9. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
  10. When flashing is completed, a green ring will appear in SP flash tool.
  11. Close SP flash tool on your computer and unplug the phone.
  12. Power on the phone and enjoy.
  13. After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
Follow Detailed Instruction Remi M1 Firmware Flashing With Sp Flash Tool

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Remi M1 Stock Rom.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device. resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data. such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.