HISENSE U601S Firmware (PAC)

HISENSE U601S Firmware (PAC)

HISENSE Mobile

HISENSE U601S

UO6

Stock Firmware

SPD SC7731

Android 6.0

U601S_S06_20170228_6.0

HOW TO FLASH

At first, Download The right Firmware as per your device Model

Download and instal Latest Spreadtrum USB drivers, Skip this step if you already have best drivers installed in your system.

Download Latest Spreadtrum Upgrade Tool. You can use any other Flasher which supports Spreadtrum but for some reasons i do recommend using this tool. It is a free Tool, It supports 99% of spreadtrum power phones and also you have no boring part to choose correct boot like other tools since this tool do auto boot.

Extract the firmware you downloaded earlier on your desktop, you can use either Winrar or 7zip.

Again, Extract Downloaded SPD upgrade Tool on your desktop.

Launch SPD upgrade tool, click on Load PAC button and scroll to where you extracted your firmware and select the .PAC file

Click on Start or Download Button.

Power off your Phone, Connect phone to PC using USB data cable while pressing and holding bootkey as per your device. Most Smartphones use Volume down button as bootkey

Once phone connected properly, Flashing process shall now begin.

Relax and wait for PASS notification.

Unplug your phone from PC and power it on, first boot will take longer than normal so just be patient and do not panic.

If Boot takes abnormaly longer, Boot phone to recovery and perform Data Wipe.

All Done.

Enjoy

Hisense_U601S_S06 - MEGA