DOWNLOAD TECNO CAMON 11 CF7 FACTORY SIGNED FIRMWARE / STOCK ROM
DOWNLOAD TECNO CAMON 11 CF7 FACTORY SIGNED FIRMWARE / STOCK ROM
Tecno Camon 11 runs on Android 8.1 Oreo themed with HiOS 4.1.
This device is a 6.2-inch ips touchscreen display with a resolution of 720 X 1500 pixels. A size of 156.6 x 76 x 5.6 mm and weighs about 145g.
This device is a 6.2-inch ips touchscreen display with a resolution of 720 X 1500 pixels. A size of 156.6 x 76 x 5.6 mm and weighs about 145g.
Powered
by 2.0GHz octa-core processor MediaTek Helio A22 MT6762 with 3GB RAM
and IMG PowerVR GE8320 GPU. There’s also 64GB of internal storage which
can be expanded up to 256GB with microSD.
There is a 13 MP + 2MP primary camera with LED Flash and a 16-mega pixel front selfie camera.
This
is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and
Bluetooth 4.0. Support GSM+WCDMA+4G LTE networks. Sensors on this phone
include fingerprint, Compass Magnetometer, Ambient light sensor,
Accelerometer, Proximity sensor and Gyroscope.
This device is powered with a 3750Mah non-removable battery
How to flash this device using Tecno Transsion Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
Launch SWD_AfterSales inside the extracted folder
Click on settings icon
Click on load button
Click on load button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Firmware Upgrade or Format + Download from drop down menu.
Click Confirm Button.
Now turn off and connect your device to PC.
Wait for flashing process to complete.
Reboot device
NOTE
If the while loading the scatter file you see checksum error, copy checksumgen.exe into the firmware folder and then launch it.
Select either Firmware Upgrade or Format + Download from drop down menu.
Click Confirm Button.
Now turn off and connect your device to PC.
Wait for flashing process to complete.
Reboot device
NOTE
If the while loading the scatter file you see checksum error, copy checksumgen.exe into the firmware folder and then launch it.
You can also use other tools like SP Flash Tool, WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
