Breaking News

DOWNLOAD TECNO POP 2 B1 FACTORY SIGNED FIRMWARE / STOCK ROM

May 15, 2019

DOWNLOAD TECNO POP 2 B1 FACTORY SIGNED FIRMWARE / STOCK ROM

Tecno Pop 2 Quick Review
Tecno Pop 2 runs on Android 8.1 Oreo Go edition themed with HiOS 3.3.

This device is a 5.5-inch ips touchscreen display with a resolution of 720 X 1440 pixels 293ppi. A size of 149.4 x 72.8 x 9.3 mm and weighs about 145g.

Powered by 1.3GHz quad-core processor MediaTek MT6580A with 1GB of RAM. There’s also 8GB of internal storage which can be expanded up to 64GB with microSD. 
There is a 5 MP primary camera with LED Flash and a 8-mega pixel front selfie camera.
This is a dual SIM Phone with other connectivity options like Wi-Fi, GPS and Bluetooth 4.0. Support GSM+WCDMA+4G LTE networks. Sensors on this phone include fingerprint, Compass Magnetometer, Ambient light sensor, Accelerometer, Proximity sensor and Gyroscope.
This device is powered with a 2400Mah non-removable battery


DOWNLOAD TECNO POP 2 B1 STOCK ROM

B1-F8018BC-GO-181117V124

===============================

B1-F8018D-GO-181114V70


How to flash this device using Tecno Transsion Flash Tool
Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because 
 flashing a wrong preloader, will make the device completely dead 
(can't power on, can't charge and will not be detected by a computer)


Download, MTK VCOM USB drivers from here
Download and extract Tecno flashtool from here
Launch SWD_AfterSales inside the extracted folder
Click on settings icon
Click on load button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Firmware Upgrade or Format + Download from drop down menu.
Click Confirm Button.
Now turn off and connect your device to PC.
Wait for flashing process to complete.
Reboot device

 NOTE
If the while loading the scatter file you see checksum error, copy checksumgen.exe into the firmware folder and then launch it.

You can also use other tools like SP Flash Tool, WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device